Modifying Image Attachments

  1. Open the workfile, and then select the Attachments tab.
  2. Double-click on an image in the Attachments pane. The image screen opens.
  3. Click on the L Rotate or L Rotate button control.
  4. Click OK, and then click Yes.
  1. Open the workfile, and then select the Attachments tab.
  2. Double-click on an image in the Attachments pane. The image screen opens.
  3. Click on the Brightness or Contrast slide control, and then drag the control to adjust the level.
  4. Click OK, and then click Yes.
  1. Open the workfile, and then select the Attachments tab.
  2. Double-click on an image in the Attachments pane. The image screen opens.
  3. Select Invert from the toolbar. The image is displayed as a negative image.
  4. From the Image pane, click and drag the image area to be saved. The image area to be saved is displayed as a framed positive image.
  5. Click on the framed image area, and then drag and drop the framed image area to adjust the location of the image area to be saved. The adjusted image is displayed in the Image pane.
  6. Select Crop from the Image pane. The cropped image is displayed.
  7. Click OK, and then click Yes.
  1. Open the workfile, and then select the Attachments tab.
  2. Double-click on an image in the Attachments pane. The image screen opens.
  3. Click Zoom Out from the toolbar, and then click on the image. The image is decreased in size.
  4. Click Zoom In from the toolbar, and then click on the image. The image is increased in size.
  5. Click OK, and then click Yes.
     

Note: Select the right or left arrows to advance to the next or previous image.